Belt conveyor maintenance

Belt Conveyor, also known mainly from the rack, conveyor belts , belt roller, tensioning equipment, transmission equipment and other components. Body is made of high quality steel plate convergence , by the difference between front and rear legs constitute irregularities rack , the plane was definitely skewed viewpoint . Rack is equipped with a belt roller , roller , etc., for the femoral artery and the supporting conveyor belts . There geared motor drives and electric drum drive both methods.

1 the operation of the belt conveyor
 2 To view the conveyor before shutdown , there is no obstacle to endanger conveyor belt . If there is , to remove obstacles to ;
3 before shutting down the power to investigate is not normal , if necessary, to carry out measurement allocation to ensure that the needs of normal voltage equipment ;
(4) If the device is normal by the view , Fluting machine can shut down operation ;
 Switch the order of attention
 a. shutdown sequence : Close the control box power switch ( power indicator lit ) → engine start button → the ratio control rotary switch to the "ON" position → gradually rotating speed control knob to the desired speed scale . Make uniform operation ; Do not use beyond 1500rpm scale .
 b. shutdown sequence : ratio control in gradually rotating the knob back to the " 0" position → be flat conveyor will stop ratio control rotary switch to the "OFF" orientation → closed ignition switch and power switch .