How Ctgrain Wheat Flour Mill combination rice mill cleanup

After using a combination of Ctgrain Wheat Flour Mill, is certainly to be cleaned, how to clean a combination of rice mill it?
1, cleaning sieve body should be smooth, intact, smooth operation, no abnormal noise.
2, pay attention to check the operation of the Ctgrain Flour Milling Machinery sieve material containing grain cases, such as with food too much, you should identify the cause and correct it.
3, clogged sieve shall beat with iron or a hard object that can be used to clear scrub brush long clogged; sieve surface rupture should be promptly repaired or replaced.
4, the fan operation should be no banging. After feeding, check the feed containing stone, and a row of stone miscellaneous, miscellaneous cases, such as sand and gravel containing too much food, you should identify the causes and to exclude.
5, Stoner sieve and each damper should be kept clear clogged sieve applied at a wire brush to clean, do not beat, to avoid damage.
6, adjust the eccentric rotation mechanism, to release the rubber pad fastening device, a good tune and then tightened, it is no pre-stressed state.