A bearing shoulder the entire load of the machine, so good lubrication of the bearing life of a great relationship, it directly affects the life and the operation rate of the machine, which requires the injection of oil must be clean, seal must be good, mainly of the machine oiling Office (1) Turn the bearing (2) roller bearing (3) All gear (4) activities bearing, sliding plane. 2 newly installed tires prone to loosening must always be checked. 3 Note whether the various parts of the Destoning Machine is working properly. 4 Note Check the wear parts wear, pay attention to the replacement of worn parts. Chassis plane 5 release of the active device, you should avoid activities out of dust and other materials bearing can not move on the bottom shelf, so that a serious accident could not have broken the machine materials. 6 bearing temperature rise, the reasons should be eliminated immediately stopped and checked. 7 Turn the gear in operation should be immediately stopped if the impact of the sound check and eliminate.Mill roller body and liner wear during use, once with the gap will increase between the body and the wear liner, combined with hot air and cement particles on the surface of the continuous erosion, resulting in the generation of trench , resulting in impact collision occurs between the body and the liner, the liner makes serious cracks or fracture, machine damage, especially damage to the gearbox, resulting in serious incidents.
没有评论:
发表评论